Products

Transmitters

TR series vibration transmitter uses advanced LSI technology that integrate the signal conditioning, processing and outputting circuitry into one integral unit. It can directly replace the probe driver and connect to the proximity probe and extension cable, converting the signal to a 4-20 mA output. Buffered dynamic output is available for additional analysis.

TR Series Transmitter is used to monitor:

Radial Shaft Vibration
Axial Thrust Position
Rotation Speed
Phase Reference
The TR is available as a two wire or three-wire transmitter configuration and certified for use in hazardous areas.

The TR series also has an option available to interface with existing proximity probe drivers. This option is typically used when it is desirable to drive the dynamic signal and the 420mA output up to 300 meters or for some hazardous area applications.

Learn more by clicking the image or header above.

For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation
   
Portable Data Logger

Less than half the price of the market leading instruments. Yet all the common features…and more!

The A4400 – VA4 Pro is a unique instrument for machinery vibration diagnostics. The latest version now contains a module for acoustic measurement. The A4400 – VA4 Pro has modules for analysing, data collecting and the recording of vibration signals. The instrument is enhanced by modules for dynamic balancing, measurement of run up and cost down, control and checking of lubrication and listening to vibration signals by the stethoscope feature. The instrument is equipped with an expert system developed by Adash, that automatically detects machinery defects…Learn more by clicking the image or header above.

Features of the Portable Data Logger

  1. Analyser,
  2. Data Collector (Route measurements),
  3. Run Up (Coast Down) measurements,
  4. Balancer,
  5. Signal Recorder.
  6. Acoustic signal module
  7. Stephoscope module
  8. All modes made for: 4 AC simultaneous channels (ICP powered),
  9. 4 DC channels for process values,
  10. 1 Tacho channel.
For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation
   
Low Cost CM for Maintenance Engineers

The new Adash A4900 Vibrio M is a vibration meter, analyzer and data collector in one. This instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, lubrication assessment and identification of mechanical faults. Many measurement techniques are processed automatically…Learn more by clicking the image or header above

 

For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation
   
Laser Vibrometry

Nearly all components of a conventional Scanning Laser Doppler Vibrometer are built into a single optical unit that is structurally complex and therefore expensive. The Vibrolaser ScanSet now overcomes these restrictions and delivers a very high level of performance in measuring…Learn more by clicking image or header above.

For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation
   
Data Management Systems

From Ultra-portable to a rack mounted Data Acquisition System, through targeted simple-to-use monitoring and analysis software, to high-performance low cost of ownership data management systems; HGL Dynamics provides truly integrated solutions for your measurement needs.

Acquisition – Visualisation – Analysis

Learn more by clicking the image or header above

For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation
   
Equipment for Installation, Commissioning and Maintenance of Condition Monitoring Systems (CMS)

Special measuring and test devices, which serve mainly as additional tools for on-line and off-line CMS and other measurement devices…Learn more by clicking image or header above.

 

For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation
   
PCM360-M Plant Condition Management System

ProvibTech’s PCM360-M is a mobile plant condition management system that integrates data collecting, processing and analyzing into one system. It is mainly used to provide a short-term fault diagnosis and analysis for experts. The system is able to work with any ProvibTech and third-party transducers to collect static,dynamic and transient data. Based on its multi-plant management mode, technicians can perform data management on various plants independently…Learn More by clicking image or header above.

For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation
   
Critical Machinery Protection Applications

The Sensonics Sentry G3 concept builds upon the established range of Sentry products developed by Sensonics and has been designed to be the most flexible and feature rich machinery protection system available. Each of the G3 module’s four channels can be independently programmed to provide continuous monitoring and protection across a broad spectrum of measurement regimes, including vibration, position, temperature and speed, providing a universal platform for the interfacing of various sensor types in compliance with the API 670 standard…Learn more by clicking image or header above.

Sentry G3 Features include:

  • Universal Input
  • 4 Channel Module
  • API 670 Compliant Machine Monitoring
  • Integral LCD Display with Channel Bar Graphs
  • Alarm Historian
  • FFT
  • 4 Alarm Relays (Expandable to 12)
  • 8 Analogue Outputs per Module
  • 19″ x 3U Rack Mounted System

 

For Competitive Prices
Contact Us and Receive
Your Free Quote and Consultation